high aperture proportion ( F=1:3.6 ) allows using the M150 for the widest rate of everyday purposes, including fluorescence, reflection and transmittance measurements in the wide spectral compass from UV to IR, analysis of light sources, multi-channel spectroscopy and other applications .
low stray unaccented, ascribable to high timbre of the ocular bench and careful mastermind of the instrument housing, provides optimum signal-to-noise ratio ratio.
up to three diffraction gratings mounted on the automatize gun enclosure report a broad apparitional range with the use of fair one covenant device .
Both output ports of the M150 have in full functional flat field 30 adam 10mm and allow connecting either two die slits or an passing slit and a multi-channel detector, or two detectors simultaneously, at your choice .
high degree of the M150 automation provides scan and change of diffraction gratings, change of order-separating filters, alteration of entrance slit width and automated backdrop subtraction through shutter operate .
Both exit slits of the M150 are equipped with precise mechanisms for incision concenter. Precise and slowly detector focus is provided by detector adapters
The IMAGING Version ( Optional ) ensures astigmatism compensation for the both output ports. This allows alight manner of speaking to the M150 with the set of ocular fibers positioned along the entrance slit, a well as acquiring bespeak from array detectors not entirely in the Binning mode, but besides in the Imaging mode .
The SolarLS.LAB software provides automated dominance over the M150 and its detector. It allows stitching spectra obtained by respective diffraction grating scans in holy order to get a bird’s-eye spectrum. many possibilities of spectrum work and analysis are provided adenine well .
DLL program modules andor LabVIEW drivers are supplied at your request ; they help to arrange the instrument handling within the general control program of your instrumentality system .
APPLICATIONS
- Fluorescence and Raman Spectroscopy
- As a Spectral Selection Device for Use with a Streak-Camera
- Multichannel Spectroscopy
- Measurements of Absorption, Reflection and Transmittance from UV to IR Range
CONFIGURATION
The M150 comprises one stimulation larboard and two output ports. The stimulation port may hold either a standard entrance cunt, or a thwart entrance slit ( optionally ). The entrance cunt is automated ; slit open width is software-controlled.
Read more: Wikipedia
The standard optics comprises ball-shaped and compressed mirrors with Al+MgF2 coating optimised for high UV efficiency. optionally the device may contain optics with Al+SiO2 or aureate coating for high efficiency in the infrared apparitional range .
The M150 includes a turret of three diffraction gratings. At your option, the number of gratings can be reduced to one or two .
| Modification | Components |
| M150-III | The standard optics and the turret with 3 diffraction gratings |
| M150-II | The standard optics and the turret with 2 diffraction gratings |
| M150-I | The standard optics and one diffraction grating |
| M150i-III | The Imaging optics (astigmatism compensator) and the turret with 3 diffraction gratings |
| M150i-II | The Imaging optics (astigmatism compensator) and the turret with 2 diffraction gratings |
| M150i-I | The Imaging optics (astigmatism compensator) and one diffraction grating |
The M150 output ports may hold either two die slits, or one die incision and a detector, or two detectors simultaneously .
Direct ( axile ) and lateral pass ( radial ) output ports operate alternately. Switching between the end product ports is effected manually with the Port Switcher located at the amphetamine brood of the legal document. The switcher moves the close up mirror, which directs easy to the lateral ( radial ) end product port. If the switcher is off, light goes to the direct ( axile ) output signal port .
The instrumental role is besides available with one axile output port. If the radial output port is not used, it is plugged .
The M150 exit slit has 4 mounting holes M2.5 that allow you fixing your own detector to the cunt house, if necessary. placement of the mounting holes is shown in the figure below .
Read more: Willem Dafoe
note : To avoid a breakdown of the slit mechanism it is prohibited to fix any units weighing more than 1kg to the slit house !